Split-panel grid


Split-panel grid with tubular and C-element.
This type is designed for allowing large sizes while providing adequate protection.
The grid is made of 18 x 1 mm steel pipe with optional horizontal spacing, e.g. between 100-600 mm keeping the 100 mm vertical spacing.
In the case of the type made of 14 x 1.2 mm steel pipe the horizontal spacing ai also optional, while the vertical spacing of 45 mm is steady.
The C-element grid differs from the tubular ones in its appearance. The falt surface makes it look more robust. The spacing is the same as that of the type made of 18 mm pipe.

Recommended applications:

• indoor and outdoor separation, separation of shops
• protection of factory buildings
• safety protection of big spaces

Movable manually or by motor

Material: All the types are galvanized, however powder-spraying is also available.

Note: In the case of painting the wearsurface might occur after rolling-up.

Maximum recommended size: 120/96-CS type, rolled, max. 20 m x 5 m, 120/96-CS type, turn-over, 10-20 m x 4 m, 60/97-CS type, only rolled 6-7 m x 5 m.

Depending on weight and size they can be moved by hand or mechanically.

Choose the best solution for your safety needs - further products...
For special solutions - ask our experts' assistance...

Our products can match the highest quality and safety requirements - Our qualifications...